Profoto B1x 500Ws AirTTL Monolight (incl. 1 Battery)

eerste dag
€ 42,00
€ 50,82
daarna
€ 21,00
€ 25,41
excl. btw incl. btw

Beschrijving

1 x B1X 500 AirTTL OCF Monolight
LED Modeling Lamp (130W Equivalent)
Better Battery: 325 Full-Power Flashes
Full 9-Stop High-Speed Sync Power Range
Flash Duration: 1/19,000 - 1/1000 Sec
0.1 - 1.9 Sec Recycling

Optional Air Remote
The Air Remote TTL transmitters have 8 frequency channels with 3 groups per channel and a range of up to 330' for TTL triggering. Each channel has power ratio capability of +/- 2 stops in TTL or +/- 9 stops in manual. Modeling light, shut-down of the unit and first or rear curtain exposure can also be selected.
Firmware Updates
Both the flash head and the Air Remote have mini-USB connections for firmware updates directly from Profoto's website.
High Speed Sync as Fast as 1/8000 Sec
High-Speed Sync (HSS) is the technical term for syncing flash with shutter speeds shorter than the so-called x-sync - typically 1/250 of a second. It is a useful tool for controlling ambient light and for freezing action. Profoto uses a unique, patent-pending technology, providing an extremely fast series of flash pulses. Switch to HSS Mode with a simple button-press that allows you to shoot at shutter speeds as fast as 1/8000 of a second.
Exceptionally Short Flash Duration
In Normal Mode, which prioritizes color fidelity, the B1 500 AirTTL is capable of T0.5 flash durations of 1/11,000 sec at minimum power, and 1/1000 sec at full power.
Freeze Mode
Freeze Mode automatically selects the shortest flash duration possible at the user-selected power level. Motion-stopping flash durations of 1/19,000 at minimum power make the B1X 500 AirTTL ideal for high speed shooting.
Quick Burst Mode
At lower power settings Quick Burst Mode allows a series of flashes to be fired at a faster pace than the B1 can recharge, allowing triggering of up to 20 frames per second.
Lithium-Ion Battery Powered
The B1's lithium-ion battery gives you up to 325 full-power flashes and thousands of minimum power flashes on a 2.5-hour charge from the provided 2.8A multi-voltage charger. An optional 4.5A quick charger shortens that time to 1.5 hours. Fuel gauge type LEDs on both the battery and charger allow you to monitor remaining power.
LED Modeling Lamp
An LED modeling light with a 130W tungsten-equivalent output draws very little power from the battery and generates minimal heat. The light can be set to proportional or full power and will dim during recycling if that option is selected.
Control Panel
The B1X's control panel has a 1.4 x 2.5" bright LCD screen that informs the user of the flash's power level, sync choice, modeling light mode, recycle alert, and battery charge level.
Power Variable Over 9 Stops
Power can be regulated over a 9-stop range (2 to 500Ws / 1/256 to 1/1) in 1/10 or 1-stop increments.
Full Light Shaper System Compatibility
With its zoom scale and integrated umbrella sleeve, the B1X 500 AirTTL is compatible with Profoto's extensive line of umbrellas, reflectors, and softboxes.