Profoto Pro-10 2400 AirTTL Power Pack

lighting-flash Profoto
keyboard_arrow_left terug
2400Ws from 2 Outlets
Built-In TTL Receiver
Wireless TTL and Power Ratio from 330'
Flash Durations as Short as 1/80,000 Sec
Recycling: 0.02 - 0.7 Sec
11-Stop Power Variation (2.4 - 2400Ws)
Uses Modeling Lamps up to 500W
AirTTL Integrated with B1x, B2, B10, A1and D2

Profoto 2400 Overview
With the introduction of the Pro-10 2400 AirTTL, Profoto satisfies the need for speed while continuing on a TTL roll that gave us the recently debuted D2 monolight. The 2-outlet 2400Ws pack recycles in 0.02 to 0.7 sec, faster than its Pro-8 predecessor, and is capable of quick bursts up to 50 flashes per second. The power range has also expanded to 11 stops (2.4 - 2400Ws), selectable in full or 1/10 stop increments on its high-resolution display. Action and special effects shooters will appreciate significantly faster flash durations as short as 1/80,000 sec. The pack also supports High-Speed Sync (HSS) up to 1/8000 sec for managing output in full daylight, creative use of wide apertures or freezing action. Firmware updates are easily installed via the pack's USB port.
To streamline your workflow, the Pro-10's fully integrated TTL lets you concentrate on inspiration rather than exposure calculation. The Pro-10 is fully compatible with the optional Air Remotes TTL-S/N/C for Sony, Nikon, or Canon which allow wireless TTL and exposure compensation at distances up to 330'. You can also shoot manually if you prefer with +/- 9 stop exposure adjustments and a 1000' wireless range. For maximum flexibility, the Pro-10 AirTTL is compatible with 11 different Pro and special application heads.

Profoto 2400 Specs

Maximum Watt/Seconds 2400
Guide Number At 6.5' (2.0 m), 100 ISO with ProHead and Magnum Reflector: 128
Recycle Time 0.02 to 0.7 sec
Quick burst up to 50 flashes per sec
Flash Duration Normal Mode (t0.5): 1/12,000 - 1/800 sec min/max power
Freeze Mode (t0.5): 1/80,000 - 1/1000 sec min/max power
Flash Variability 2.4 to 2400Ws over an 11-stop range in 1/10 or 1/1 step increments
Voltage Stabilization Not specified by the manufacturer
Distribution Fully asymmetric
Head Outlets 2
Flash Ready Indicator Audible and visible
Operating Voltage 100 - 240 VAC, 50/60 Hz
Sync Voltage Compliant to ISO 10330 standard
Built-in Slave Cell IR/Slave photocell
Built-in AirTTL Receiver
Fully integrated with other AirTTL flashes such as B1, B2, and D2. Requires separate purchase of an Air Remote TTL for Nikon, Canon, or Sony.
Circuit Protection Slow-blow fuse 16A/230V, 20A/110V
Fan Cooled Yes
Auto Dump Yes
Dimensions 11.4 x 8.3 x 11.8" (29 x 21 x 30 cm)
Weight 29.8 lb (13.2 kg)


Verhuurprijs eerste dag

90,00


attach_filemanual

Delen op
Pinterest Facebook Twitter Google+ Whatsapp E-mail

Suggesties